Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

The Master-Fit® BTR series with automatic flue damper provides outstanding performance and maximum installation flexibility for both new construction and replacement applications. Multiple options for placement of water connections and low installation clearances are additional installer-friendly features.

Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
Inlet/outlet connections located top, front and rear for greater installation flexibility
Space-saving units are up to one foot shorter than models they replace
Installs standalone, manifolded or connected to storage tanks

Specification

(Natural or Propane) gas water heater(s) shall be A. O. Smith Master-Fit® model # _____________ or equal, with a storage capacity of __________ gallons, an input rating of ___________________ BTUs per hour, a recovery rating of_________ gallons per hour (gph) at 100ºF rise and a maximum hydrostatic working pressure of 160 psi. Water heater(s) shall be protected against overheating caused by the buildup of scale, film and other sediment by a self-cleaning device, positioned inside the tank so that it directs the flow of inlet water to keep precipitated solids in suspension so that they are removed from the water heater on that or successive draws. Glasslined water heater(s) shall also be protected against electrolytic corrosion by multiple factory-installed anode rods. In addition, water heater(s) shall: 1) Be equipped with an integrated control system consisting of a 180ºF adjustable thermostat with upper and lower sensing bulbs. 2) Be equipped with intermittent electronic ignition, a manual reset gas shutoff device, a gas pressure regulator, factory-installed, CSA Certified and ASME Rated T&P relief valve and 2-3/4˝ x 3-3/4˝ tank inspection port. 3) Be design-certified by UL (Underwriters Laboratories) to current edition of ANSI Z.21.10.3 - CSA 4.3 standards governing storage-type water heaters. 4) Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/ IESNA 90.1. 5) Have a 3-year limited warranty against corrosion as outlined in the written warranty.

Technical specification

Unique ref.aosmith-btr
Product familyStorage Water Heaters
Product groupMaster-Fit
TypeObject (single object)
Date of publishing2017-10-16
Edition number1

Links

Product urlhttp://www.hotwater.com/water-heaters/commercial/water-heaters/gas/master-fit/master-fit-standard-draft/
Installation instructionshttp://www.hotwater.com/resources/product-literature/instruction-manuals/commercial-gas/

Material mainSteel
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryHVAC - Water Heaters
Uniclass 2015 CodePr_60_60_96_34
Uniclass 2015 DescriptionGas-fired storage water heaters
CSI MasterFormat 2014 Code22 34 36
CSI MasterFormat 2014 TitleCommercial Gas Domestic Water Heaters
OmniClass Number23-31 29 13 13
OmniClass TitleHot Water Tank Gas Heaters

Region availability

North America
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States