HCONTROL HYBRID insulation

HCONTROL HYBRID is a reflective vapour control layer layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and suspended floors. HCONTROL HYBRID provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U-Value. It can be used in conjunction with any type of insulation. HCONTROL HYBRID is available in rolls of 10m2 (1600mm wide), 45mm thick.

Specification

HCONTROL HYBRID is a thin multifoil insulation with built-in vapour control function. The product is composed of 20 layers, including coated metal reinforced polyolefin external films, coated metal polyolefin films, polyolefin foams and polyester wadding. HCONTROL HYBRID is typically installed on the warm side of roof, wall, ceiling or suspended floor constructions. The product should be installed in a continuous layer to guarantee contiguous insulation, airtightness and prevent any water vapour diffusion through the structure. Product features: - Thickness: 45mm - Weight: 950g/m² - Declared thermal performance: Core thermal resistance: 1.9 m²K/W Thermal resistance with 2 air cavities of 20mm (heat flow horizontal): 3.2 m²K/W Declared emissivity: 0.06 - Water vapour resistance: >1000MNs/g - Water tightness: W1 - Air permeability: Airtight - Fire rating: NPD - Roll size: 1.6 x 6.25m - Area: 10m²/roll - Non-hazardous with no special requirements for installation or disposal of waste - Life expectancy: The product is expected to remain effective for the service life of the building provided that it is installed in accordance with the manufacturer’s instructions and certification. Uniclass Code: Pr_25_57_06_57 Multifoil Blanket Insulation HCONTROL HYBRID is CE-marked in accordance with EN13984. HCONTROL HYBRID has been designed for and fully tested in accordance with the EN 16012 standard for reflective insulation, including the application of 90/90. All testing of the product has been carried out by accredited independent test houses including VTT Expert Services Ltd. The product has been tested in-situ according to ISO9869 by Glasgow Caledonian University. HCONTROL HYBRID has been awarded LABC and LABSS Registered Detail, is accepted by NHBC and holds BM Trada Q-mark.

Technical specification