Rolling Service Doors Model 926

The Model 926 Rolling Steel Service Door provides an economical and durable solution for industrial openings.

DESIGNED FOR DURABILITY

Wayne Dalton Rolling Doors have a long history of excellence in design and construction that has met and often exceeded the needs and expectations of even the most critical projects.

Model 926 Rolling Service Doors are composed of flatfaced slats that provide a natural water shed and help reduce corrosion.

The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils. The door features a strong double-angle bottom bar reinforcing the lower edge of the curtain against wind pressure and permitting varied lock, astragal and safety edge options.

This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation. Zinc-plated, cast iron windlocks add strength and prevent lateral slat movement.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Specification

Key Product Features
- Max Width: 12’*
- Max Height: 12’*
- Mounting: Face of wall or between jambs
- Operation: Manual push-up: chain hoist where door weight exceeds manual effort
- Curtain: 26-gauge, #17 slats are 2” flat style profile, constructed of hot-dipped galvanized steel with polyester primer and baked on white polyester top coat paint finish
- Locking: Slide bolts on manual operation; padlockable chain keeper with chain hoist (padlock not included)
- Bottom Bar: Galvanized steel, double angle design with bottom astragal
- Guides: Roll-formed 1/8” thick steel channel guides (G guides) and 3/16” thick steel wall angles comprise the guide assembly
- Brackets: 1/4" or 3/16" steel plates with permanently sealed ball bearings
- Counter Balance: Counterbalance barrel assembly is made from 4” steel pipe and helical torsion springs designed for 20,000 cycles with cast iron spring fittings
- Wind Load: Standard wind load rated with a minimum of 20 psf
*Larger sizes may be available. Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge. Consult factory for more information. 800-764-1457
Slat Profiles
No 17 - Flat-faced slat in up to 20-gauge steel, 20-gauge stainless steel, or 16 B&S gauge aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1 7/8" on centers.
Secur-Vent® - Perforated slat provides optimal security and ventilation. Slat consists of 1/16" diameter hole offereing 20 to 25% open area over length of each slat. Available in No. 17 flat slat up to 14' wide x 12' high.

Technical specification

Unique ref.rolling-service-doors-model-926
Product familyCommercial Doors
Product groupRolling Doors
TypeObject (single object)
Date of publishing2024-04-25
Edition number1

Links

Material mainSteel
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryDoors - Industrial Doors
IFC classificationDoor
CSI MasterFormat 2014 Code08 33 23
CSI MasterFormat 2014 TitleOverhead Coiling Doors
OmniClass Number23-17 11 13 25
OmniClass TitleOverhead Metal Doors

Region availability

North America
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States