RAVAPROOF AVIP GLOSS RUBBER

AVIPGLOSS RUBBER is a single component bituminous coating, based on a blend of bitumen and additives. It is recommended for the most difficult applications and works perfectly in combination with elastomeric bitumen membranes. When cured, it produces excellent adhesion to both cement and metal surfaces and is characterized by its high elasticity, fast drying. Before use, low spin agitation is needed.

It does not contain solvents, does not smell and its low viscosity allows it to be used as an excellent primer in a great range of applications on different surfaces.

It is not affected by low concentration acid and alkaline solutions. AVIPGLOSS Rubber is used to protect concrete and steel structures such as: basements, foundations, retaining walls, columns, and vertical surfaces. It creates a waterproof and protective coating for roofs, terraces, and horizontal surfaces. It can be used for the maintenance of bituminous waterproofing systems, as an excellent ecologic primer for special applications in combination with bituminous membranes as well as in repairing old / damaged bituminous applications.

COMPONENTS

Mix of bitumen, special additives and emulsifiers and water.

Specification

Description: High elasticity anionic bitumen emulsion
Color: Dark Brown/black
Odor: Odorless
Appearance: Liquid
Solids Content: > 60 % w/w
Melting point (EN 1427): >120°C
Elognation (ASTM D 412): > 1200%
Viscosity: 1160-180 (sp.4,5 RPM, 25ºC)
Density: 980-1050 g/lt (ELOT ΕΝ ISO 2811)
Service temperature: +5°C to +35°C
Maximum drying time (+25°C): 24h

Standard: EN 1504-2 : 2004
Permeability to CO2: sD > 50 m
Permeability to water vapor: 5 m ≤ sD ≤ 50 m, class II
Capillary absorption and permeability to water: w < 0,1 kg/m² ∙h0,5
Adhesion by cross cut test: < GT 2
Adhesion strength by pull of test: ≥ 0,8 Mpa
Resistance thermal shock: ≥ 0,8 Mpa
Crack bridging ability: >2,500 mm / Class A5
Reaction to fire: Class E