5.2.2 SPECIAL SYSTEMS - Shaft wall + studs wall lining

5.2.2 SPECIAL SYSTEMS - Shaft wall + studs wall lining

Partition consisting of a frame made from 90-mm wide, 0.7-mm thick galvanised steel plate profiles, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). On the inaccessible (hollow area) a partition side is created by fitting a 25-mm thick Pladur® CH board with E-90 first and last studs and CH-90 studs in between, having a continuous band of Pladur® intumescent acoustic sealant between both materials. Three 15-mm thick Pladur® F boards, including joint treatment, are screwed to the accessible side of the partition. Next, on the accessible side, an independent wall lining is installed, consisting of a structure of profiles of galvanized steel sheet metal on Pladur® studs and channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with angular pieces that are attached to the core of the studs and the Pladur® CH partition, leaving a minimum space of 10 mm between the frame and the partition. On the exterior side of this structure one or more Pladur® (N, I or H1) plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc., with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), except on the inaccessible side of the system. Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Specification

Wall for all kinds of shafts, when high fire protection and/or acoustic insulation is required, or when difficult access means the shafts must be installed from the outside only.

Technical specification

Unique ref.pladur_5_se_5_22
Product family5. Sistemas especiales PLADUR®
Product group5.2. Tabiques CH
TypeObject (single object)
Date of publishing2017-06-22
Edition number1

Links

Product urlhttps://sistemasselector.etexgroup.com/selectorf2/sistemas/sistemas-especiales.aspx
Installation instructionshttps://corporativo.pladur.com/-/dam/manual-tecnico-es-pladur.pdf/pi99466/original/manual-tecnico-es-pladur.pdf?v=-1514606774
Instruction videohttps://www.youtube.com/user/CanalPladur
Technical descriptionhttps://corporate.pladur.com/en/systems-category/special-systems-pladur/

Material mainGypsum
Material secondaryPlaster
Designed inSpain
Manufactured inSpain

Classification

BIMobject CategoryWalls - Partitions
IFC classificationWall
UNSPSC nameGypsum board
UNSPSC code30161509
Uniclass 2015 CodeSs_25_10_30_35
Uniclass 2015 DescriptionGypsum board partition systems
CSI MasterFormat 2014 Code09 21 16.33
CSI MasterFormat 2014 TitleGypsum Board Area Separation Wall Assemblies
OmniClass Number23-15 11 11 11
OmniClass TitleGypsum Board Fixed Partitions
CSI UniFormat II CodeC1010
CSI UniFormat II TitlePartitions

Region availability

Europe	Asia	North America	Africa	South America	Oceania
Åland Islands	Afghanistan	Anguilla	Algeria	Argentina	American Samoa
Albania	Armenia	Antigua and Barbuda	Angola	Bolivia	Australia
Andorra	Azerbaijan	Aruba	Benin	Brazil	Cook Islands
Austria	Bahrain	Barbados	Botswana	Chile	Federated States of Micronesia
Belarus	Bangladesh	Belize	Burkina Faso	Colombia	Fiji
Belgium	Bhutan	Bermuda	Burundi	Ecuador	French Polynesia
Bosnia and Herzegovina	British Indian Ocean Territory	British Virgin Islands	Cameroon	Falkland Islands (Islas Malvinas)	Guam
Bulgaria	Brunei	Canada	Cape Verde	French Guiana	Kiribati
Croatia	Cambodia	Caribbean Netherlands	Central African Republic	Guyana	Marshall Islands
Cyprus	China	Cayman Islands	Chad	Paraguay	Nauru
Czech Republic	Christmas Island	Collectivity of Saint Martin	Comoros	Peru	New Caledonia
Denmark	Cocos (Keeling) Islands	Costa Rica	Côte d'Ivoire	Suriname	New Zealand
Estonia	Georgia	Cuba	Democratic Republic of the Congo	Uruguay	Niue
Faroe Islands	Hong Kong	Curaçao	Djibouti	Venezuela	Norfolk Island
Finland	India	Dominica	Egypt		Northern Mariana Islands
Germany	Indonesia	Dominican Republic	Equatorial Guinea		Palau
Gibraltar	Iran	El Salvador	Eritrea		Papua New Guinea
Greece	Iraq	Greenland	Eswatini		Pitcairn Islands
Guernsey	Israel	Grenada	Ethiopia		Samoa
Hungary	Japan	Guadeloupe	Gabon		Solomon Islands
Iceland	Jordan	Guatemala	Ghana		Timor-Leste
Ireland	Kazakhstan	Haiti	Guinea		Tokelau
Isle of Man	Kuwait	Honduras	Guinea-Bissau		Tonga
Italy	Kyrgyzstan	Jamaica	Kenya		Tuvalu
Jersey	Laos	Martinique	Lesotho		United States Minor Outlying Islands
Latvia	Lebanon	Mexico	Liberia		Vanuatu
Liechtenstein	Macau	Montserrat	Libya		Wallis and Futuna
Lithuania	Malaysia	Nicaragua	Madagascar
Luxembourg	Maldives	Panama	Malawi
Malta	Mongolia	Puerto Rico	Mali
Moldova	Myanmar (Burma)	Saint Kitts and Nevis	Mauritania
Monaco	Nepal	Saint Lucia	Mauritius
Montenegro	North Korea	Saint Pierre and Miquelon	Mayotte
Netherlands	Oman	Saint Vincent and the Grenadines	Morocco
North Macedonia	Pakistan	Saint-Barthélemy	Mozambique
Norway	Palestine	Sint Maarten	Namibia
Poland	Philippines	The Bahamas	Niger
Portugal	Qatar	Trinidad and Tobago	Nigeria
Romania	Saudi Arabia	Turks and Caicos Islands	Republic of the Congo
Russia	Singapore	U.S. Virgin Islands	Reunion
San Marino	South Korea	United States	Rwanda
Serbia	Sri Lanka		Saint Helena
Slovakia	Syria		São Tomé and Príncipe
Slovenia	Taiwan		Senegal
Spain	Tajikistan		Seychelles
Svalbard and Jan Mayen	Thailand		Sierra Leone
Sweden	Türkiye		Somalia
Switzerland	Turkmenistan		South Africa
Ukraine	United Arab Emirates		South Sudan
United Kingdom	Uzbekistan		Sudan
Vatican City	Vietnam		Tanzania
	Yemen		The Gambia
			Togo
			Tunisia
			Uganda
			Western Sahara
			Zambia
			Zimbabwe