Palladiom Shading System
Lutron Palladiom Motorized Roller Shades are
ideal for exposed applications. Controlled by
an ultra-quiet, precision Sivoia QS Palladiom
drive, these shades are mounted on solid
aluminum brackets that completely conceal
wiring and offer a refined aesthetic in a variety
of finishes to match any setting.
Features
• Single shades up to 12 ft (3.66 m) wide
• Single shades up to 14 ft (4.27 m) tall
• Symmetrical light gaps, as small as 1
⁄2 in (12 mm)
NOTE: At high aspect ratio (tall and narrow) shade sizes, Lutron
may apply a fabric deduction, which increases the size of the light
gaps to compensate for the increased probability of telescoping
• Shades move in unison, maintaining alignment within 1
⁄8 in (3 mm) at
all times
• Sound: 35 dBA measured 3 ft (0.91 m) from the EDU
• Bottom bar speed: 3.6 in/sec (91.4 mm/sec)
• Solid aluminum shade brackets with concealed fasteners, available
in a variety of finishes
• Ideally paired with the Palladiom Bottom Rail, available in
matching finishes
• Available with a wide variety of fabric types, including sheer,
translucent, and room darkening fabrics
• Power failure memory for the lifetime of the product
• Available in QS Wired and QS Wireless configurations
• Designed to provide a means to completely conceal wiring and
control/programming buttons
– Control/programming buttons are easily accessed behind the
finishing ring on the drive bracket (for details, see Finishing
Rings on page 8)
• Idler can be extended 1
⁄8 in (3 mm) to allow for installation tolerance.
Extending the idler increases the bracket-to-bracket width of the
shade, as well as the light gap on the idler side of the shade.
Power and Communication
• Compatible power sources
– Individual Plug-In
› QSPS-P1-1-35V
› QSPS-P2-1-35V
› QSPS-P3-1-35V
– 10-Output Power Panels
› QSPS-10PNL
› QSPSY-10PNL
– Configurable Power Panels
› QSPS-10PNL-NPM (with WIN-PS-5CC-R installed)
› QSPS-30PNL-NPM (with WIN-PS-5CC-R installed)
– Individual Junction Box
› QSPS-J-1-35V
• Low-voltage power and communication in a single
4-wire cable
• The connector provided with the shade is compatible with
16-24 AWG solid or stranded wire (when using the wire housing
WIN-WM-BOX-10, stranded wire is recommended due to its
greater flexibility)
Accessories
• Wire management kit to help eliminate exposed wiring
• Bracket shims for each bracket type
Palladiom Shading System
(6 reviews)
