FLOODLIGHT PHOTOCELL 65 W
Floodlight with daylight sensor, 65 W power consumption.
Product features Daylight sensor, integrated in glass cover.Switch on below 35 lux, switch off above 95 lux illuminance.Reflector-based, symmetric light distribution with 100° x 100° beam angle.Integrated wide voltage driver, suitable for 100 - 277 V AC.
Surge protection up to 6 kV (L/N-PE), 4 kV (L-N).Mounting bracket with 30° angle and wide rotation area.Breather membrane to optimize air exchange, without compromising IP protection.Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires.
Product benefits Bright, robust and durable.Automatically switches on and off according to the amount of available daylight.Always-on override, activated via special mains switching pattern.Safe and very uniform illumination, due to frosted and tempered glass diffuser.No upper light output ratio (ULOR 0%) when mounted at 0° tilt.Energy savings of up to 90 % compared to halogen lamp floodlights.5 years guarantee.
Areas of application Replacement for floodlights with halogen lamps.Outdoor use (IP65).Industry.Public areas.Construction areas.Building facades.
FLOODLIGHT PHOTOCELL 80 W
Floodlight with daylight sensor, 80 W power consumption.
Product features Daylight sensor, integrated in glass cover.Switch on below 35 lux, switch off above 95 lux illuminance.Reflector-based, symmetric light distribution with 100° x 100° beam angle.Integrated wide voltage driver, suitable for 100 - 277 V AC.
Surge protection up to 6 kV (L/N-PE), 4 kV (L-N).Mounting bracket with 30° angle and wide rotation area.Breather membrane to optimize air exchange, without compromising IP protection.Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires.
Product benefits Bright, robust and durable.Automatically switches on and off according to the amount of available daylight.Always-on override, activated via special mains switching pattern.Safe and very uniform illumination, due to frosted and tempered glass diffuser.No upper light output ratio (ULOR 0%) when mounted at 0° tilt.Energy savings of up to 90 % compared to halogen lamp floodlights.5 years guarantee.
Areas of application Replacement for floodlights with halogen lamps.Outdoor use (IP65).Industry.Public areas.Construction areas.Building facades.
FLOODLIGHT PHOTOCELL 125 W
Floodlight with daylight sensor, 125 W power consumption.
Product features Daylight sensor, integrated in glass cover.Switch on below 35 lux, switch off above 95 lux illuminance.Reflector-based, symmetric light distribution with 100° x 100° beam angle.Integrated wide voltage driver, suitable for 100 - 277 V AC.
Surge protection up to 6 kV (L/N-PE), 4 kV (L-N).Mounting bracket with 30° angle and wide rotation area.Breather membrane to optimize air exchange, without compromising IP protection.Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires.
Product benefits Bright, robust and durable.Automatically switches on and off according to the amount of available daylight.Always-on override, activated via special mains switching pattern.Safe and very uniform illumination, due to frosted and tempered glass diffuser.No upper light output ratio (ULOR 0%) when mounted at 0° tilt.Energy savings of up to 90 % compared to halogen lamp floodlights.5 years guarantee.
Areas of application Replacement for floodlights with halogen lamps.Outdoor use (IP65).Industry.Public areas.Construction areas.Building facades.
FLOODLIGHT PHOTOCELL 165 W
Floodlight with daylight sensor, 165 W power consumption.
Product features Daylight sensor, integrated in glass cover.Switch on below 35 lux, switch off above 95 lux illuminance.Reflector-based, symmetric light distribution with 100° x 100° beam angle.Integrated wide voltage driver, suitable for 100 - 277 V AC.
Surge protection up to 6 kV (L/N-PE), 4 kV (L-N).Mounting bracket with 30° angle and wide rotation area.Breather membrane to optimize air exchange, without compromising IP protection.Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires.
Product benefits Bright, robust and durable.Automatically switches on and off according to the amount of available daylight.Always-on override, activated via special mains switching pattern.Safe and very uniform illumination, due to frosted and tempered glass diffuser.No upper light output ratio (ULOR 0%) when mounted at 0° tilt.Energy savings of up to 90 % compared to halogen lamp floodlights.5 years guarantee.
Areas of application Replacement for floodlights with halogen lamps.Outdoor use (IP65).Industry.Public areas.Construction areas.Building facades.
FLOODLIGHT PHOTOCELL 200 W
Floodlight with daylight sensor, 200 W power consumption.
Product features Daylight sensor, integrated in glass cover.Switch on below 35 lux, switch off above 95 lux illuminance.Reflector-based, symmetric light distribution with 100° x 100° beam angle.Integrated wide voltage driver, suitable for 100 - 277 V AC.
Surge protection up to 6 kV (L/N-PE), 4 kV (L-N).Mounting bracket with 30° angle and wide rotation area.Breather membrane to optimize air exchange, without compromising IP protection.Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires.
Product benefits Bright, robust and durable.Automatically switches on and off according to the amount of available daylight.Always-on override, activated via special mains switching pattern.Safe and very uniform illumination, due to frosted and tempered glass diffuser.No upper light output ratio (ULOR 0%) when mounted at 0° tilt.Energy savings of up to 90 % compared to halogen lamp floodlights.5 years guarantee.
Areas of application Replacement for floodlights with halogen lamps.Outdoor use (IP65).Industry.Public areas.Construction areas.Building facades.
For guarantee see www.ledvance.com/guarantee
For this product family multiple variants might exist with specific properties!
Please refer to the specification text where each product url is listed.
Older generations of a product family can be accessed at our website https://www.ledvance.com.
You need to use Revit 2021 or higher to use our Revit files.
Contact: bim@ledvance.com
4.7 (20)
