350/500 Heavy Wall ® IR Entrances

350/500 Heavy Wall™ IR Entrances have been tested not only to meet South Florida requirements set forth by the Florida Building Code (FBC) and the Level D requirements of ASTM E 1996, but the even more stringent Level E (Enhanced Facilities) requirements of ASTM E 1996.

Additionally the Entrances withstood the testing requirements of ASTM F 1642 for blast mitigation.

To resist both lever arm and torsion forces that constantly act upon any door, 350/500 Heavy Wall™ IR Entrance doors feature four Sigma deep penetration and fillet welds plus mechanical fastening at each corner. In addition to the standard two-year warranty covering every Kawneer door, each door corner for the 350/500 Heavy Wall™ Entrances comes with a limited lifetime warranty, good for the life of the door under normal-use operation.

Key Features Include:

• 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2" bottom rail
• 500 wide stile has 5" vertical stile, 5" top and 6-1/2" bottom rail
• Door is 2" deep
• Door has 3/16" wall thickness
• Welded corner construction
• Single acting
• Offset pivot, butt hinges or continuous geared hinge
• Surface mounted or concealed closers
• MS lock or exit device hardware
• Architects Classic push-pulls
• Square stops with interior silicone seal for 9/16" (14.3 mm) or 1" (25.4 mm) glazing infills
• Adjustable astragal utilizing pile weathering with polymeric fin at meeting stiles
• Polymeric bulb weatherstripping in door frames
• Permanodic™ anodized finishes in seven standard choices
• Painted finishes in standard and custom choices

Optional Features

• Numerous push/pull options
• Paneline™ exit device or Paneline™ EL exit device
• 3/16" heavy wall frame
• Crossrails and 10" Bottom Rail
• Square stops with 3M™ VHB™ Structural
• Glazing Tape at interior for 9/16" (14.3 mm) or 1" (25.4 mm) glazing infill
  

Product Applications

• 350/500 Heavy Wall IR provides added strength for schools, institutions, office buildings and other high traffic applications where codes require windborne debris or blast mitigating protection.