ATT Mini FLOOR DRAIN – gully horizontal with square top, two-part - sheet steel grating

ATT floor drains and inlets are manufactured from stainless steel, e.g. AISI 304, EN 1.4301 and AISI 316L, EN 1.4404: AISI 304, EN 1.4301 and AISI 316L, EN 1.4404. The type of the gully depends on the load class, the amount of drained liquid (medium) and the structural parameters (e.g. thickness of the ceiling).

The gullies/point drainages are made of sheet steel with a thickness adjusted to the gully type. All elements are welded in argon shield and then etched, which ensures high quality of welds.

Mini drains are used in places where, for hygienic and aesthetic reasons, stainless steel elements should be used, and the small amount of water collected allows the use of a smaller drain diameter.

DESCRIPTION OF THE FLOOR DRAINS COMPONENTS

Bodies – round shape limits waste accumulation and enables easy waste removal. The welded joints are grinded to remove sharp edges and ensure safe installation or cleaning.

Gratings – perforated sheet grating fastened by screws.

Strainers – to prevent the debris and other solid particles from entering and clogging the drain.

Traps – very functional and easy to maintain. Ensures easy access to the sewer, quick cleaning and offers a possibility of checking for locks.

Flanges – used when it’s necessary to drain water from horizontal systems installed under the floor.