ActivRAC® 3M with 4-Post

Spacesaver’s ActivRAC® 3M High-Density Mobile Storage System puts your storage on wheels and rail to maximize storage efficiency, allowing you to recover valuable floor space or double your storage capacity in the same space. ActivRAC 3M’s durable, steel carriages are built in the USA and pair seamlessly with Spacesaver’s reconfigurable 4-Post shelving, mobilizing up to 3,000 pounds per carriage section. ActivRAC 3M and 4-Post shelving combined provide you with a versatile, efficient storage solution, that can be customized to fit any space or functionality.

Specification

Mobile Carriage Bases
Assembled structural steel carriage base will have a
maximum capacity of 3,000 lbs. (1,360 kg) per carriage
section. Each wheel assembly shall be equipped with two
steel wheels, minimum 3” (76mm) diameter steel wheels.
Wheels are equipped with two permanently lubricated
and shielded radial ball bearings. Wheel capacity 1,500
lbs. (680 kg) each. Wheels have solid steel axles of
0.75”(19mm) diameter. Wheels shall be dual flange,
all-wheel guided. All carriage sections between wheel
assemblies have integral diagonal bracing to maintain
accepted tolerances for function of systems. Side profiles
shall provide and maintain wheel assembly alignment
and squareness. These profiles shall be pre-drilled at the
factory, but are bolted, and assembled on the job site as
integral carriage members. Structural steel side profiles
shall be minimum 3.00” (76mm) high, 12-gauge (2.7mm).
Finish shall be powder-coat paint.

Line Shaft Drive System
Line shaft drive consists of a wheel section positioned at
each rail location. Wheel section shall consist of a load
wheel and a drive wheel. Each wheel shall be provided
with two permanently shielded bearing assemblies.
Wheels shall be ASTM A 536 specification 65/45/12
machined ductile iron. All wheels shall be 3” (76 mm)
diameter. All wheels on one side of the carriage shall be
driven by a continuous steel drive shaft 1” (25 mm) O.D.
x 0.810” (20.5mm) I.D. connected to the 0.75” (19 mm)
diameter wheel drive axles with bolted clamp connections.

Mechanical Assist Housing and Operator
Mobilized storage bases are moved by means of a
mechanical assist chain and sprocket drive unit and
operator located in the front of each carriage. Multiple
drive ratios are available. A roller chain connects sprockets
and adjustable chain idlers and is required to maintain
proper chain tension. Carriage is moved by rotating a three
spoke handle with rotating knobs. The anti-roll mechanism
system is required to prevent carriage from drifting. Dual
control housings and operators for accessing a system
module from both the front and rear are optional.
Specifications are subject to change.

Technical specification

Unique ref.activrac-3m-with-4-post
Product familyHigh-Density Mobile Shelving Systems
Product groupHigh-Density Mobile Shelving Systems
TypeObject (single object)
Date of publishing2024-05-23
Edition number1

Links

Material mainSteel
Material secondarySteel
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryFurniture - Shelving & Storage
IFC classificationFurniture
Uniclass 2015 CodePr_40_30_78_53
Uniclass 2015 DescriptionMovable aisle storage units
CSI MasterFormat 2014 Code10 56 13
CSI MasterFormat 2014 TitleMetal Storage Shelving
OmniClass Number23-21 11 11 11
OmniClass TitleCommercial Storage Shelves

Region availability

North America
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States