HMS-15
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45 degrees; linear peak SPL, measured with pink noise, 128.5 dB at 1 meter, free field. Coverage shall be 80-degree horizontal by 50-degree vertical.
The loudspeaker shall be equipped with dual Phoenix 5-pin male connectors (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS‑488HP IntelligentDC power supply.
Components shall be mounted in a multi-ply hardwood enclosure with a black textured finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be 19.00 inches wide x 29.10 inches high x 12.50 inches deep (483 mm x 739 mm x 318 mm) without mounting bracket. Weight shall be 60 lbs (27.2 kg).
The loudspeaker shall be the Meyer Sound HMS‑15.
HMS-15AC
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45 degrees; linear peak SPL, measured with pink noise, 128.5 dB at 1 meter, free field. Coverage shall be 80-degree horizontal by 50-degree vertical.
Audio connectors shall be XLR 3-pin, female and male, accommodating balanced audio, or XLR 5-pin, accommodating both balanced audio and RMS. The internal power supply shall perform automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100–240 V AC at 50–60 Hz. Maximum long-term continuous current draw shall be 1.3 A rms at 115 V AC, 0.7 rms at 230 V AC, and 1.5 A rms at 100 V AC. AC power connectors shall be powerCON 20 with loop output. The loudspeaker shall optionally include the RMS remote monitoring system module.
Components shall be mounted in a multi-ply hardwood enclosure with a black textured finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be 19.00 inches wide x 29.10 inches high x 12.50 inches deep (483 mm x 739 mm x 318 mm) without mounting bracket. Weight shall be 64 lbs (29.0 kg).
The loudspeaker shall be the Meyer Sound HMS‑15AC.
Keyword: Cinema, Surround, Loudspeaker, Loudspeakers
4.4 
