Archived

RevoSec

RevoSec is an elegant and transparent full-height turnstile available in many configurations: from model FP with full stainless steel construction, roof, rounded glass panel infill, full panel glass wings and stainless steel column; further enhanced by framed glass panel wings and brush strips (model FG).

Delivered in a kit form, it is easily transported to the installation site. The RevoSec is available with three (120°) rotor elements for more passage clearance.

The RevoSec is available as 1500mm unit diameter.

Passage in both directions is electronically controlled.

The RevoSec offers a standard electro-mechanical head able to prevent two passages at one time, equipped with damper for a silent mechanism and smooth operation.

For models FP and FG, a sensor restricts access to the dead area generating an alarm in case of passage in the unauthorised direction of passage. The door will lock and then release in this direction via a cornice mounted keyswitch.

In the event of an emergency or power-off scenario, the unit can be configured fail-safe i.e. rotor freely rotates or fail-lock i.e. rotor locks. This option is available either in one or both directions of passage.

Specification

Technical Specifications
Drive
Hand operated. Logic Voltage 24Vac.
Materials
Casework: 304 grade grained stainless steel
Glass Infill: 8.2mm laminated glass panels
Ceiling: Painted MDF, standard white RAL 9010
Rotor Wings (FP/FG): 10mm thick toughened glass
panels laminated 11.5mm thick with brush strips/ slated
acrylic wings 20mm thick with stator bars
Rotor Column: Tubular 304 grade stainless steel
Mechanism
Electro-mechanical head mechanism:
• Positive action lock to prevent two passages at a time
• Self centring mechanism to ensure complete rotation in
the rest position
• Anti backup device to prevent reverse rotation once the
head moved 30° from rest position
• Hyrdraulic damper to ensure a smooth and quiet
operation
Power Failure / Fire Alarm
The rotor wings remain locked in the fail-lock configuration
(not recommended for FP and FG models to not trap
people in the dead area) or can freely rotate in the fail-safe
configuration. Fail-Lock or Fail-Safe configuration is
available in one or both directions and must be specified at
time of order placement. Note that head mechanism fail
state will be the same as power failure choice. Input facility
is available for voltage free contact to effect fire alarm fail
state (COMR1 interface required).
Models
• RevoSec FP90
• RevoSec FP120
• RevoSec FG90
• RevoSec FG120