BIM objects - Free download! Ponzio WS65THI door

Ponzio WS65THI door

The system allows the realization of aluminium windows 1, 2 and 3 wings, swing, door windows, door to one or more doors. Wasistas opening system, tilt and turn, pivoting window or projected window.All Ponzio systems are available in various solutions that you will find on our technical catalogs, downloadable from our site ponzioaluminium.com in PDF format. The following are the technical characteristics of the system in question: • Thermal insulation: Uf= 1,4 W/m2K up to Uf= 2,7 W/m2K • Air permeability: Class 4 • Waterhinghtness: E1500 • Wind load resistance: C5 • Sound insulation: 47 dB • Burglar resistance: RC3 * NOTE: the data show the values for a particular typology of the WS65THI with specific dimensions. The values of the selected typology must be determined individually.

Specification

Supply and window installation realized with the “WS 65 THI” system. Section bars are extruded in alloy of aluminium 6060 (UNI 9006/1), T6 supply state (TA 16), dimensional tolerances and thicknesses UNI EN 12020-02. The frame will have to have 65/79 mm. total depth. The wing will have 71/77 mm. depth with heights of the tubular different measurement room for the windows, window doors and in the increased version for the doors, in order to have a proportionate resistance to the solicitations applied to the window. The seal system will be: to joint opened (with central gasket in Epdm with fin of seal in support directed to the suitable inclined wing profile plan) or overlapping. The thermal insulation principle: the internal profile and the external profile are connected with little bars of insulating material with very low conductivity (λ= 0.21-0.30 W/m2K) in order to ensure a good thermal cutting. All this is increased by the presence of a under glass and under frame gasket that contributes to the achievement of a thermal transmittance value “Uw” reduced. Glass gaskets in Epdm with the uobj (leccare) - lip ensure a better thermal and acoustic system performance. Frame and wing section bar corner joints are made through suitable corner joints. In the cross one lower of the frame will have to be practised some slots, concealed by suitable hoods, which will allow the water unloading. In the windows and doors to two or more wings, the central section will be realized by carryover section bar that it allows the beat inversion and that it changes according to the typologies. Be the frame section bars and the glass pane ones are supplied with gasket quarry for the glass sealing. Profiles for strip and base taken back are supplied with kernel what, subject to manufacturing of the section bar, allows the assembly with struts through suitable screws. The superficial section bar finish can be made through anodizing (with prescriptions dictated by the QUALANOD - EURAS/EWAA good quality mark) in the various shades, after undergoing a process of cleaning and pickling, or painting (with prescriptions dictated by the QUALICOAT good quality mark) in the many colours according to the tables RAL.

Technical specification