Publish your products
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker
Acheron Studio Loudspeaker

    Acheron Studio Loudspeaker

    Designed for smaller theaters and post production facilities, Acheron Studio offers the same exceptional fidelity and extended high-frequency performance as Acheron with a convection cooled amplifier for very quiet rooms. Seamless integration with the HMS-10 surround loudspeakers and the X-800C subwoofer create a complete system for smaller venues.

    Features & Benefits

    • High peak power output with ultralow distortion
    • Exceptional fidelity and extended highfrequency performance
    • Constant-Q horn yields uniform response throughout coverage area
    • Extraordinarily flat amplitude and phase response for tonal accuracy
    • Seamless integration with HMS-10 surround loudspeakers and X-800C subwoofer

    Applications

    • Small theaters
    • Custom, private theaters
    • Re-recording stages
    • Mixing for post production facilities
    Specification
    • The loudspeaker shall be a self-powered, full-range system; the transducers shall consist of a 15-inch diameter cone driver and a 4-inch diaphragm compression driver on an 80-degree horizontal by 50-degree vertical horn. The loudspeaker system shall incorporate internal processing electronics and a two channel amplifier, one channel for each driver. Processing functions shall include frequency and phase correction, signal division, and protection for the low- and high-frequency sections. The crossover point shall be 580 Hz.

      Each amplifier channel shall be class AB/bridged with complementary MOSFET output stages. Burst capability for the low-frequency channel shall be 550 watts total with a nominal 2-ohm resistive load and 250 watts for the high-frequency channel with a nominal 8-ohm resistive load. Total burst power shall be 700 watts (1400 watts peak). Distortion (THD, IM, TIM) shall not exceed 0.02%. Performance specifications for a typical Notes: production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range shall be 37 Hz to 18 kHz; phase response shall be ±30° from 700 Hz to 17 kHz.

      The audio input shall be electronically balanced with a 10 kOhm impedance and accept a nominal 10 dBV (3.2 V rms, 4.5 V peak) signal. Connector shall be XLR (A-3) type female with parallel looping male. RF filtering shall be provided, and CMRR shall be greater than 80 dB from 50 Hz to 500 Hz.

      The internal power supply shall perform automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50 or 60 Hz. UL and CE operating voltage range shall be 100 to 240 V AC. Maximum peak current draw during burst shall be 2.9 A at 115 V AC, 1.5 A at 230 V AC and 3.3 A at 100 V AC. Current inrush during soft turn-on shall not exceed 11 A at 115 V AC, 18 A at 230 V AC, and 13 A at 100 V AC. AC power connector shall be PowerCon.

      The loudspeaker system shall provide facilities for installing Meyer Sound’s optional RMS remote monitoring system.

      All loudspeaker components shall be mounted in an acoustically vented enclosure constructed of premium birch plywood with a low-gloss, black-textured finish. Dimensions shall be 25.38" wide x 30.78" high x 16.79" deep (787 mm x 919 mm x 521 mm). Weight shall be 113 lbs (51.26 kg). An optional version of the loudspeaker shall include side rigging attachment points and the MYA-AST mounting yoke.

      The loudspeaker shall be the Meyer Sound Acheron Studio.

      Keyword: Screen Channel Loudspeaker, Loudspeaker, Loudspeakers

    Technical specification
    • Unique ref.meyersound-acheron-studio
    • Product familyLoudspeakers
    • Product groupCine-Studio
    • TypeObject (single object)
    • Date of publishing2019-04-25
    • Edition number1
    Related
    • Material mainBirch
    • Material secondaryPlywood
    • Designed inUnited States
    • Manufactured inUnited States
    Classification
    • BIMobject CategoryElectronics - Audio
    • Uniclass 2015 CodePr_70_75_36_50
    • Uniclass 2015 DescriptionLoudspeakers
    • CSI MasterFormat 2014 Code27 24 23
    • CSI MasterFormat 2014 TitleAudio-Video Devices
    • OmniClass Number23-37 15 29 11 13
    • OmniClass TitleLoudspeakers

    Region availability

    Europe Asia North America Africa South America Oceania
    Åland Islands
    Afghanistan
    Anguilla
    Algeria
    Argentina
    American Samoa
    Albania
    Armenia
    Antigua and Barbuda
    Angola
    Bolivia
    Australia
    Andorra
    Azerbaijan
    Aruba
    Benin
    Brazil
    Cook Islands
    Austria
    Bahrain
    Barbados
    Botswana
    Chile
    Federated States of Micronesia
    Belarus
    Bangladesh
    Belize
    Burkina Faso
    Colombia
    Fiji
    Belgium
    Bhutan
    Bermuda
    Burundi
    Ecuador
    French Polynesia
    Bosnia and Herzegovina
    British Indian Ocean Territory
    British Virgin Islands
    Cameroon
    Falkland Islands (Islas Malvinas)
    Guam
    Bulgaria
    Brunei
    Canada
    Cape Verde
    French Guiana
    Kiribati
    Croatia
    Cambodia
    Caribbean Netherlands
    Central African Republic
    Guyana
    Marshall Islands
    Cyprus
    China
    Cayman Islands
    Chad
    Paraguay
    Nauru
    Czech Republic
    Christmas Island
    Collectivity of Saint Martin
    Comoros
    Peru
    New Caledonia
    Denmark
    Cocos (Keeling) Islands
    Costa Rica
    Côte d'Ivoire
    Suriname
    New Zealand
    Estonia
    Georgia
    Cuba
    Democratic Republic of the Congo
    Uruguay
    Niue
    Faroe Islands
    Hong Kong
    Curaçao
    Djibouti
    Venezuela
    Norfolk Island
    Finland
    India
    Dominica
    Egypt
    Northern Mariana Islands
    France
    Indonesia
    Dominican Republic
    Equatorial Guinea
    Palau
    Germany
    Israel
    El Salvador
    Eritrea
    Papua New Guinea
    Gibraltar
    Japan
    Greenland
    Eswatini
    Pitcairn Islands
    Greece
    Jordan
    Grenada
    Ethiopia
    Samoa
    Guernsey
    Kazakhstan
    Guadeloupe
    Gabon
    Solomon Islands
    Hungary
    Kuwait
    Guatemala
    Ghana
    Timor-Leste
    Iceland
    Kyrgyzstan
    Haiti
    Guinea
    Tokelau
    Ireland
    Laos
    Honduras
    Guinea-Bissau
    Tonga
    Isle of Man
    Lebanon
    Jamaica
    Kenya
    Tuvalu
    Italy
    Macau
    Martinique
    Lesotho
    United States Minor Outlying Islands
    Jersey
    Malaysia
    Mexico
    Liberia
    Vanuatu
    Latvia
    Maldives
    Montserrat
    Libya
    Wallis and Futuna
    Liechtenstein
    Mongolia
    Nicaragua
    Madagascar
    Lithuania
    Myanmar (Burma)
    Panama
    Malawi
    Luxembourg
    Nepal
    Puerto Rico
    Mali
    Malta
    North Korea
    Saint Kitts and Nevis
    Mauritania
    Moldova
    Oman
    Saint Lucia
    Mauritius
    Monaco
    Pakistan
    Saint Pierre and Miquelon
    Mayotte
    Montenegro
    Palestine
    Saint Vincent and the Grenadines
    Morocco
    Netherlands
    Philippines
    Saint-Barthélemy
    Mozambique
    North Macedonia
    Qatar
    Sint Maarten
    Namibia
    Norway
    Saudi Arabia
    The Bahamas
    Niger
    Poland
    Singapore
    Trinidad and Tobago
    Nigeria
    Portugal
    South Korea
    Turks and Caicos Islands
    Republic of the Congo
    Romania
    Sri Lanka
    U.S. Virgin Islands
    Reunion
    Russia
    Syria
    United States
    Rwanda
    San Marino
    Taiwan
    Saint Helena
    Serbia
    Tajikistan
    São Tomé and Príncipe
    Slovakia
    Thailand
    Senegal
    Slovenia
    Türkiye
    Seychelles
    Spain
    Turkmenistan
    Sierra Leone
    Svalbard and Jan Mayen
    United Arab Emirates
    Somalia
    Sweden
    Uzbekistan
    South Africa
    Switzerland
    Vietnam
    South Sudan
    Ukraine
    Yemen
    Sudan
    United Kingdom
    Tanzania
    Vatican City
    The Gambia
    Togo
    Tunisia
    Uganda
    Western Sahara
    Zambia
    Zimbabwe