Veröffentlichen Sie Ihre Produkte
High Intensity Infrared Heater, Model KMI

High Intensity Infrared Heater, Model KMI

Google-Übersetzung,

Die Serie KMI, High Efficiency Infrared Heater hat einen Strahlungswirkungsgrad von bis zu 81%! Energiesparende Reflektorhauben, Doppelgasdüse und herausnehmbare Brennkammer sind nur einige Merkmale, die diese Infrarotheizung von der Konkurrenz abheben.

  • Energiesparende Reflektorhauben mit 100 % Max Fibre Isolierung
  • Neue „High-Grid“-Technologie sorgt für eine weitere Optimierung der Strahlausbeute
  • Erhöhte Strahlungseffizienz von bis zu 81 %
  • Optimiertes Kaltstart- und Waste-Gas-Verhalten
  • Effizienzsteigerung durch maximale Vorwärmung des Gemisches
  • Logistischer Vorteil durch konsequente Anwendung des Baukastensystems
  • Verstellbare Reflektorplatten ermöglichen eine individuelle Anpassung an die Anforderungen der Anwendung
  • Reduzierung der Wartungskosten durch einfachen Ausbau der Brennkammer
Spezifikation
  • Assemblies shall be CSA approved High-intensity heaters to ANS1 Z83.19 (latest revision) and CSA 2.35 (latest revision). Approval shall include components of the complete heater, including burners, reflectors, accessories, thermostats, and associated controls and specifications. Installations of units shall comply with local building codes, or in their absence, the latest edition of the national regulations and procedures listed below. Heaters shall be electrically grounded in accordance with the National Electric Code, ANSI/NFPA 70 in the US, and the Canadian Electric Code, CSA C22.1 in Canada, and shall comply with all local requirements. Heaters shall be installed only for use with the type of gas appearing on the rating plate, and the installation shall conform to the National Fuel Gas Code, ANSI Z223.1 (NFPA 54) in the US and the Natural Gas and Propane Installation Codes, CAN/CGA B 149.1 & B149.2 in Canada. The Manufacturer warrants to the original owner that the product will be free of defects in material and workmanship. For the Series KMI, the warranty for all components except for the ceramic burner head assembly is limited to 24 months from the date of installation. The ceramic burner head assembly shall be warranted for an additional 8 years for units that are proven to the satisfaction of the manufacturer to be inoperative due to defects in material or workmanship.

    Basis-of-Design Product shall be Superior Radiant Products Model KMI Series high-efficiency high-intensity type gas-fired radiant infrared heaters with firing rates as called for in the contract documents within the range of 21 MBH to 125 MBH. CSA approved complete with single body burner head, ignition control, valve & gas pressure switch. Heaters must provide a radiant factor of at least 81% as tested to EN 419-2 standard and provide documentation upon request and shall cover the entire infrared spectrum – from short to long wavelengths at a minimum gas inlet pressure of 6.5 inches W.C. (natural gas) and 12 inches W.C. (propane). Maximum inlet pressure for both fuel types is 14 inches W.C. The unit shall draw no more than 20 VA at either 24 VAC or 120VAC, 60Hz. The heater shall perform controlled and clean surface combustion. The resulted quantity of noxious components CO and NOx shall be CO:  20 – 200 ppm; NOx: 4 – 10 ppm. Heater body shall comprise of Burner-head (mixing chamber, ceramic emitter tiles, and steel mesh), outer body, and reflector assemblies. Burner head shall be stainless steel venturi placed inside insulated reflector housing and shall provide for pre-heat of the air-fuel mixture to achieve higher efficiency. Ignition shall be a solid-state direct spark and make a minimum of 3 ignition attempts before lockout. Ignition shall have openly accessible sense current contacts. Gas valve shall include a manual valve, two magnetic operators, and a standard gas pressure regulator and have pressure taps to measure inlet and manifold pressures. Controls shall incorporate a gas pressure switch capable of shutting off power to the ignition module in case of inlet gas pressure drops below the minimum requirement.

    This product was specified based on best practice design to meet the specific engineered design criteria for this project. 

    Any submission for substitution must include the following material for consideration or bid will be deemed unqualified and rejected:

    • Independent lab testing to EN416-2 standard dated no later than 6 months from date of submission showing a minimum 81% radiant factor.
    • Professional Engineer Stamped Design, calculations, and complete set of stamped drawings with a new system.
    • Stamped fuel usage data showing a minimum 20% fuel savings over specified Superior Radiant Model.
    • Verification that Manufacturer successfully completed and passed the auditing requirements for ISO 9001 Quality Management System (QMS).
Technische Spezifikation
  • Referenznummerkmi
  • ProduktfamilieHigh Intensity Heaters
  • ProduktgruppeHigh Efficiency - Series KMI
  • TypObjekt (Einzelobjekt)
  • Veröffentlichungsdatum2021-02-16
  • Editionsnummer1
Verwandt
  • HauptmaterialAluminium
  • Sekundär MaterialKeramik
  • Entwickelt inKanada
  • Hergestellt inKanada
Klassifikation
  • BIMobject KategorieHLK - Technik - Heizkörper
  • IFCClassificationStandheizung
  • UNSPSCNameSpace heaters
  • UNSPSCCode40101819
  • Classifications.Uniclass2015CodePr_70_60_36_70
  • Classifications.Uniclass2015BeschreibungRadiant luminous heaters
  • Klassifizierung23 55 23
  • Format2014TitelGas-Fired Radiant Heaters
  • OmniClassNummer23-33 15 17 13
  • OmniClassTitelFuel Fired HVAC Radiant Heaters
  • CSIUniFormatIICodeD3090
  • CSIUniFormatIITitleOther HVAC Systems & Equipment

Verfügbarkeit in den Regionen

Europa Nordamerika Asien
Åland
Anguilla
Armenien
Albanien
Antigua und Barbuda
Aserbaidschan
Andorra
Aruba
Bangladesch
Belgien
Bahamas
Bhutan
Bosnien und Herzegowina
Barbados
Britisches Territorium im Indischen Ozean
Bulgarien
Belize
Brunei Darussalam
Dänemark
Bermuda
China
Deutschland
Besondere Gemeinde
Georgien
Estland
Britische Jungferninseln
Hongkong
Färöer
Costa Rica
Indien
Finnland
Curaçao
Indonesien
Frankreich
Dominica
Japan
Gibraltar
Dominikanische Republik
Kambodscha
Griechenland
El Salvador
Kasachstan
Guernsey
Grenada
Kirgisistan
Irland
Grönland
Kokosinsel (Keeling)
Island
Guadeloupe
Laos
Isle of Man
Guatemala
Macao
Italien
Haiti
Malaysia
Jersey
Honduras
Malediven
Kroatien
Jamaika
Mongolei
Lettland
Jungferninseln
Myanmar (Birma)
Liechtenstein
Kaimaninseln
Nepal
Litauen
Kanada
Nordkorea
Luxemburg
Kuba
Pakistan
Malta
Martinique
Philippinen
Moldawien
Mexiko
Singapur
Monaco
Montserrat
Sri Lanka
Montenegro
Nicaragua
Südkorea
Niederlande
Panama
Tadschikistan
Nordmazedonien
Puerto Rico
Taiwan
Norwegen
Republik Trinidad und Tobago
Thailand
Österreich
Saint-Barthélemy
Turkmenistan
Polen
Sankt Kitts und Nevis
Usbekistan
Portugal
Sankt Lucia
Vietnam
Rumänien
Sankt Martin
Weihnachtsinsel
Russland
Sankt Pierre und Miquelon
San Marino
Sankt Vincent und die Grenadinen
Schweden
Sint Maarten
Schweiz
Turks- und Caicosinseln
Serbien
USA
Slowakei
Slowenien
Spanien
Svalbard und Jan Mayen
Tschechische Republik
Ukraine
Ungarn
Vatikanstadt
Vereinigtes Königreich
Weißrussland
Zypern