Henkel Polybit Watertite WA11

Characteristics:

• Good flexibility
• Thermal co-efficient of expansion similar to that of concrete
• Good adhesion to both porous and non-porous surfaces
• Good mechanical properties
• For ceramic tiles (glazed & terracotta), vitrified tiles, porcelain tiles, mosaic tiles and natural stones like granite, sandstone
• Easy workability
• Crack resistance
• Smooth surface finish
• Anti fungal/Anti bacterial

Components:

1. Polyflex - A two component polymer mortar composite flexible water proofing slurry is applied at a minimum thickness of 2mm in two coats on the concrete surface to protect the underlying screed against moisture penetration.

2. Watertite CL 252 - Non-woven sealing tape applied in all corners, joints, edges, floor drains and other penetrations.

3. Ceresit CM11 - Universal polymer modified cementitious tile adhesive with very low emissions for indoor and outdoor areas.

4. Ceresit CE33 - cement-based tile grout for filling joints in floor & wall of ceramic, porcelain, mosaic, natural stone, marble & granite indoor and outdoor areas. For joints between 1 and 8mm wide.

System specification:

- Mixed density, [g/cc]: 1.8±0.02 (ASTM D 1475)

- Tensile strength, [N/mm2]: > 8 (ASTM D 412)

- Elongation, [%]: > 50 (ASTM D 412)

- Adhesion strength, [N/mm2]: > 0.5 (ASTM D 4541)

- Crack bridging, [mm]: > 0.5 (ASTM C 836)

- Hydrostatic pressure @ 5 bar: No leakage (BS EN 12390)

- Hydrostatic negative pressure@ 3 bar: No leakage (BS EN 12390)

- Toxicity: Non toxic (BS 6920 [WRAS])

- Reaction to fire: Class A (ASTM E 84)

- Abrasion resistance, [mg]: < 75 (ASTM D 4060)

- VOC, [g/l]: < 50 (ASTM D 3960/D 236)