ModSec Securus S1

Standard: LPS 1175 A1 (SR1) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013

Product Reference: CLD ModSec Securus S1 358 Rigid Mesh Panel System

Description: Mesh and wire panel installed using ModSec concrete base (see separate ModSec Base Q40)

Panel width: 2520mm

Wire diameter: 4mm

Mesh size: 76.2 x 12.5 mm mesh

Available Heights

Select as required: 1830mm to 5000mm

Nominal height: 1.8m to 5m

Finish: Polyester powder-coated to minimum 80 microns.

Any RAL colour

Top edge projection: nil

Panel installation: Maximum 50mm above top of ModSec Base block

Security topping

options: Barbed and razor wire, cranked and straight

Posts: Special flanged post, galvanised after manufacture and polyester powder-coated to match fencing

Post dimensions: 80mm x 60mm. Corner posts: 80mm x 80mm.

Maximum post

Centres: 2520mm +/- 9mm

Fixings: 120mm x 6mm full length clamp bar. M8 Stainless Steel cup square bolt (min 30mm)

Foundations: Install using ModSec foundation system. Must be installed on suitable flat ground, ensuring blocks interlock and posts are installed in every fourth block. Set post into block with suitable compound depending on permanent or temporary installation.

Warranty: Minimum of 15 years against manufacturing defects.

Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.

Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.