Veröffentlichen Sie Ihre Produkte
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers

    Ashby Ceiling Loudspeakers

    Google-Übersetzung,

    Die konzentrische Konfiguration mit zwei Treibern des Ashby bietet Genauigkeit und Wiedergabetreue über den gesamten Bereich: Erleben Sie alles, von kristallklarer Sprache bis hin zu funkelnden Höhen und satten Bässen der Musik.

    Merkmale und Vorteile

    • Selbstversorgt
    • Einfach zu installieren
    • Extrem breite und konsistente Abdeckung
    • Extrem geringe Verzerrung
    • Außergewöhnliches SPL-zu-Größe-Verhältnis
    • Schöner Niederfrequenzgang und Wiedergabe von Sprache und Musik
    • Unterstützt lange Kabelwege mit dünnen Kabeln. Ein MPS-488HP kann bis zu 16 Ashby-8Cs mit Strom versorgen

    Anwendungen

    • Verteilte Systeme für Musik und Paging, die eine hohe Audio- und Sprachverständlichkeit erfordern
    • Konstellations-Akustiksysteme
    Spezifikation
    • Ceiling Loudspeaker: Ashby 5C

      The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.

      Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

      The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

      The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.

      The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

      Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).

      Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).

      The loudspeaker shall be the Meyer Sound Ashby-5C

      Ceiling Loudspeaker: Ashby 8C
      The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.

      Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.

      The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

      The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

      The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.

      The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

      Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).

      Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).

      The loudspeaker shall be the Meyer Sound Ashby-8C. 

      Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

    Technische Spezifikation
    • Referenznummermeyersound-ashby
    • ProduktfamilieLoudspeakers
    • ProduktgruppeULTRA
    • TypObjekt (Einzelobjekt)
    • Veröffentlichungsdatum2020-03-12
    • Editionsnummer2
    Verwandt
    • HauptmaterialAluminium
    • Entwickelt inUSA
    • Hergestellt inUSA
    Klassifikation
    • BIMobject KategorieElektronisches Zubehör - Audioelektronik
    • IFCClassificationObjekt
    • Classifications.Uniclass2015CodePr_70_75_36_50
    • Classifications.Uniclass2015BeschreibungLoudspeakers
    • Klassifizierung27 24 23
    • Format2014TitelAudio-Video Devices
    • OmniClassNummer23-37 15 29 11 13
    • OmniClassTitelLoudspeakers

    Verfügbarkeit in den Regionen

    Europa Asien Nordamerika Afrika Südamerika Ozeanien
    Åland
    Afghanistan
    Anguilla
    Ägypten
    Argentinien
    Amerikanisch-Samoa
    Albanien
    Armenien
    Antigua und Barbuda
    Algerien
    Bolivien
    Australien
    Andorra
    Aserbaidschan
    Aruba
    Angola
    Brasilien
    Cookinseln
    Belgien
    Bahrain
    Bahamas
    Äquatorialguinea
    Chile
    Fidschi
    Bosnien und Herzegowina
    Bangladesch
    Barbados
    Äthiopien
    Ecuador
    Föderierte Staaten von Mikronesien
    Bulgarien
    Bhutan
    Belize
    Benin
    Falklandinseln (Malvinen)
    Französisch-Polynesien
    Dänemark
    Britisches Territorium im Indischen Ozean
    Bermuda
    Botsuana
    Französisch-Guyana
    Guam
    Deutschland
    Brunei Darussalam
    Besondere Gemeinde
    Burkina Faso
    Guyana
    Kiribati
    Estland
    China
    Britische Jungferninseln
    Burundi
    Kolumbien
    Kleinere Inselbesitzungen der Vereinigten Staaten
    Färöer
    Georgien
    Costa Rica
    Demokratische Republik Kongo
    Paraguay
    Marshallinseln
    Finnland
    Hongkong
    Curaçao
    Dschibuti
    Peru
    Nauru
    Frankreich
    Indien
    Dominica
    Elfenbeinküste
    Suriname
    Neukaledonien
    Gibraltar
    Indonesien
    Dominikanische Republik
    Eritrea
    Uruguay
    Neuseeland
    Griechenland
    Israel
    El Salvador
    Gabun
    Venezuela
    Niue
    Guernsey
    Japan
    Grenada
    Gambia
    Nördliche Marianen
    Irland
    Jemen
    Grönland
    Ghana
    Norfolkinsel
    Island
    Jordanien
    Guadeloupe
    Guinea
    Osttimor
    Isle of Man
    Kambodscha
    Guatemala
    Guinea-Bissau
    Palau
    Italien
    Kasachstan
    Haiti
    Kamerun
    Papua-Neuguinea
    Jersey
    Katar
    Honduras
    Kap Verde
    Pitcairninseln
    Kroatien
    Kirgisistan
    Jamaika
    Kenia
    Salomonen
    Lettland
    Kokosinsel (Keeling)
    Jungferninseln
    Komoren
    Samoa
    Liechtenstein
    Kuwait
    Kaimaninseln
    Kongo
    Tokelau
    Litauen
    Laos
    Kanada
    Lesotho
    Tonga
    Luxemburg
    Libanon
    Kuba
    Liberia
    Tuvalu
    Malta
    Macao
    Martinique
    Libyen
    Vanuatu
    Moldawien
    Malaysia
    Mexiko
    Madagaskar
    Wallis und Futuna
    Monaco
    Malediven
    Montserrat
    Malawi
    Montenegro
    Mongolei
    Nicaragua
    Mali
    Niederlande
    Myanmar (Birma)
    Panama
    Marokko
    Nordmazedonien
    Nepal
    Puerto Rico
    Mauretanien
    Norwegen
    Nordkorea
    Republik Trinidad und Tobago
    Mauritius
    Österreich
    Oman
    Saint-Barthélemy
    Mayotte
    Polen
    Pakistan
    Sankt Kitts und Nevis
    Mosambik
    Portugal
    Palästina
    Sankt Lucia
    Namibia
    Rumänien
    Philippinen
    Sankt Martin
    Niger
    Russland
    Saudi-Arabien
    Sankt Pierre und Miquelon
    Nigeria
    San Marino
    Singapur
    Sankt Vincent und die Grenadinen
    Réunion
    Schweden
    Sri Lanka
    Sint Maarten
    Ruanda
    Schweiz
    Südkorea
    Turks- und Caicosinseln
    Sambia
    Serbien
    Syrien
    USA
    Sankt Helena
    Slowakei
    Tadschikistan
    São Tomé und Príncipe
    Slowenien
    Taiwan
    Senegal
    Spanien
    Thailand
    Seychellen
    Svalbard und Jan Mayen
    Türkei
    Sierra Leone
    Tschechische Republik
    Turkmenistan
    Simbabwe
    Ukraine
    Usbekistan
    Somalia
    Ungarn
    Vereinigte Arabische Emirate
    Südafrika
    Vatikanstadt
    Vietnam
    Sudan
    Vereinigtes Königreich
    Weihnachtsinsel
    Südsudan
    Weißrussland
    Swasiland
    Zypern
    Tansania
    Togo
    Tschad
    Tunesien
    Uganda
    Westsahara
    Zentralafrikanische Republik