Protecta FR Damper

Protecta^® FR Damper is used to fire proof ventilation ducts which penetrate fire rated constructions such as fire compartments and fire walls; preventing the passage of fire and smoke (surrounding and inside the ventilation duct).

The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire. The aperture surrounding the dampers are fire sealed with Protecta fire stopping products.

The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed.

The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.

Available in the following sizes: Ø63, Ø80, Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400, Ø500, Ø630, Ø800, Ø1000 and Ø1250.

Specifikation

- Maintenance-free and no electrical connections necessary.
- The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
- An aperture can include several dampers and in addition, technical services such as cables, cable trays and pipes.
- The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
- Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
- Keeps the temperature in the duct network lower than 120°C, protecting fans and sensitive units in the system.
- Insulation of ducts is not necessary.
- Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
- The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to easily fit the dampers.
- The dampers are attached to the inside of the ducts, giving the benefit of space-saving.
- The dampers are only 15 cm long and bends can be connected right behind the fire seal (also available to order in other sizes).
- The damper can be attached to a vent on one side.

Teknisk specifikation

Unik ref.Protecta_FR_Damper
ProduktfamilieProtecta
ProduktgruppeFR Damper
TypeObjekt (enkelt objekt)
Udgivelsesdato2020-03-17
Udgavenummer1
Dybde (mm)150

Links

Produkt-URLhttps://www.protecta.co.uk/product/fr-damper/
Instruktionsvideohttps://www.youtube.com/watch?v=mSRlSbdhZJQ&t=16s
Teknisk beskrivelsehttps://www.protecta.co.uk/wp-content/uploads/2021/02/Technical-Data-Sheet-3.pdf

Relateret

Materiale primærtGalvaniseret stål
Designet iStorbritannien
Fremstillet iStorbritannien

Klassifikation

BIMobject-kategoriBrandprodukter - Stops
IFC-klassifikationObjekt

Tilgængelighed i region

Europa
Åland
Albanien
Andorra
Belgien
Bosnien-Herzegovina
Bulgarien
Cypern
Danmark
Estland
Færøerne
Finland
Frankrig
Gibraltar
Grækenland
Guernsey
Holland
Hviderusland
Irland
Island
Isle of Man
Italien
Jan Mayen
Jersey
Kroatien
Letland
Liechtenstein
Litauen
Luxembourg
Malta
Moldova
Monaco
Montenegro
Nordmakedonien
Norge
Østrig
Polen
Portugal
Rumænien
Rusland
San Marino
Schweiz
Serbien
Slovakiet
Slovenien
Spanien
Storbritannien
Sverige
Tjekkiet
Tyskland
Ukraine
Ungarn
Vatikanstaten