SLR-12-0 Standing Seam Roof Panel System

With a wide selection of design options and superior strength capabilities, the SLR Series provides versatile architectural solutions for any project. SLR panels are standing seam roofing panels that can transition to wall. The 2" high seam may be mechanically seamed at 90 or 180 degrees at slopes as low as 1/2: 12 for the latter. Onsite roll-forming is available. Contact Morin for custom design options and capabilities for SLR.

Product Highlights

Onsite roll-forming of panels in continuous lengths is available to eliminate panel end laps
Watertight seam from eave to ridge for slopes as low as 1/2: 12 (for 180 degree seam)
Design option to transition from wall to roof
Curving capability down to 20' radius
Clip relief design to allow thermal expansion and contraction
Available in aluminum, galvalume, stainless steel, zinc, and copper
Standard and custom finish options available
ASTM, UL and FM approvals

Specifikation

Panel Attachment
Standing seam concealed sliding or fixed clip, mechanically seamed
Panel Dimensions
Width: 12" nominal
Height: 2" nominal
Standard Lengths: 5'-40' (shorter and longer lengths available)

Color and Finish Options
Full range of Morin standard colors as well as custom color options are available. Finish on one side or both sides.
Environmental
LEED Certified and EPD available for all products. View the EPD and LEED letter on our Certifications page.

Teknisk specifikation

Unik ref.slr-12-0-roof-panel-system
ProduktfamilieRoof Systems
ProduktgruppeSLR Series
TypeObjekt (enkelt objekt)
Udgivelsesdato2023-09-07
Udgavenummer1

Links

Produkt-URLhttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/
Monteringsvejledninghttps://www.morincorp.com/content/dam/morin/products/slr/slr-installation-guide.pdf
Produktcertificeringhttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/?s=d
Teknisk beskrivelsehttps://www.morincorp.com/content/dam/morin/products/slr/morin-slr-slr-12-0-cr-r100-productdatasheet.pdf

Relateret

Materiale primærtMetal
Designet iUSA
Fremstillet iUSA

Klassifikation

BIMobject-kategoriKonstruktion - Tag
IFC-klassifikationTag
ETIM-kodeEG019610
ETIM-navnRoofing materials
Uniclass 2015-kodePr_25_71_14
Uniclass 2015-beskrivelseCladding and lining panels (Lightweight cladding and roofing panels)
CSI MasterFormat 2014-kode07 41 13
CSI MasterFormat 2014-titelMetal Roof Panels
OmniClass-nummer23-13 39 11 11
OmniClass-betegnelseExterior Metal Roof Panels