Parallel Fan Powered Terminal with Electric Reheat - FVI-500

The Metalaire model FVI-500 parallel fan-powered terminal unit is designed to provide superior comfort to zones by intermittent parallel fan operation. Conditioned primary air is varied during cooling while the fan cycles on during heating. Parallel fan-powered terminal units allow for recovery of waste heat from the return plenum and a potential reduction in central fan energy, thereby lowering operating costs.

Capacities ranging from 150-5,600 CFM in 7 casing sizes
AHRI Certified, ETL listed, UL 1995, Complies with NFPA 90A and UL 181
Pneumatic, Electric, Analog, or Direct Digital Controls available
Hot Water or Electric Heat available for reheat applications

Specifikation

- Single speed high efficiency PSC motor with SCR motor speed control
- Field adjustable baffles, top and bottom, for balancing
- Large bottom access panel provided for easy motor/blower servicing
- Gasketed back draft damper to minimize leakage in cooling mode
- Industry leading continuous welded primary inlet duct to minimize leakage with three stiffening beads for added rigidity
- All metal constructed inlet flow sensor with extra balancing taps
- NEMA 1 rated control enclosure with stand-off to prevent penetration of casing
- Full range of options and accessories available including liners, heating coils, access doors, attenuators, etc.
- All FVI-600 terminal units are AHRI certified and shipped with the AHRI seal
Liners
- 1” 1.5lbs fiberglass
- ¾”, or 1” 1.5lbs foil faced
- ½” or 1” Thermopure closed cell foam
Access Doors
- Damper
- Motor/Blower
- Inlet sensor
- Hot water coil
- Electric heat
Other options available:
- 5 different control enclosures
- 4 different handing configurations
- 3 different outlet connections
- Hanger brackets
- 4 different transformers
- ECM Motors
- Multiple how water coil options
- Multiple electric heat options
- Custom options