Brivo ACS300 Ethernet/Wi-Fi Controller
Brivo ACS300 Ethernet/Wi-Fi Controller
    Brivo

    Brivo ACS300 Ethernet/Wi-Fi Controller

    The Brivo ACS300 is our next generation of Ethernet/Wi-Fi controller designed to support components of Brivo Access control platforms.

    Building blocks for Brivo cloud-based security

    Brivo’s controllers are the supporting components of your Brivo access control platform. The ACS300-E is used for Brivo Access accounts.

    KEY FEATURES:

    • Supports:
      • Brivo Smart Readers as well as OSDP and Weigand readers
      • Up to 2 card readers per control panel
      • Brivo Mobile Pass
      • Select Brivo wireless lock integrations
    • Host communication via ethernet or WiFi
    • Host authentication via digital certificates
    • IP-based access control and alarms
    • Power over Ethernet (PoE+)
    • Encrypted storage and communications
    Specifikation
    • Total number of credentials Unlimited credentials per ACS300-E controller when connected to Brivo Access. Up to 250,000 credentials per controller while offline.
      Maximum number of card readers 2
      Event history 60,000 events (FIFO) offline from host
      Input points 8 inputs per controller
      On board; (2) door position inputs; (2) Request to exit inputs; (4) Auxiliary inputs
      Output relays 6 outputs per controller
      (2) non-latching wet (12V, 350mA) or dry (6A @ 28VDC) selectable door lock relays, plus (4) general purpose dry relays (6A @ 28VDC)
      Max power consumption 12VDC @ 2.5A peak with all outputs at maximum allowed current limits.
      Card reader inputs (2) Wiegand Ports
      or
      (1) RS-485 Port for (2) OSDP Readers
      Temperature and humidity range Operating temperature: 32ºF to 125ºF, (0ºC to 49ºC) Humidity; Max 85% non-condensing
      Included components (2) MOV surge suppressors
      Input Power Recommended: Power over Ethernet (PoE+) from network switch or PoE+ injector
      Alternate: 12VDC, 2.5A - power supply (not included)
      Output Reader Power The controller can also supply power to the card reader devices:
      Each Wiegand Card Reader Port can supply 350mA @ 12VDC
      RS-485 Port can supply a total of 350mA @12VDC
      Enclosure dimensions 7.4”W x 7.5”H x 1.5”D (187mm x 190mm x 40mm)
      Host communications Ethernet 10/100Mbps or WiFi IEEE 802.11 b/g/n (2.4GHz)
    Teknisk specifikation
    • Unik ref.brivo-acs300-ethernet_wi-fi-controller
    • ProduktfamilieDevices
    • ProduktgruppeControl Panels
    • TypeObjekt (enkelt objekt)
    • Udgivelsesdato2023-08-14
    • Udgavenummer1
    Relateret
    • Designet iUSA
    • Fremstillet iUSA
    Klassifikation
    • BIMobject-kategoriElektronik - Controls
    • IFC-klassifikationRegulator
    • Uniclass 2015-kodePr_75_75_27
    • Uniclass 2015-beskrivelseElectronic access control products
    • CSI MasterFormat 2014-kode08 74 00
    • CSI MasterFormat 2014-titelAccess Control Hardware
    • OmniClass-nummer23-29 13 00
    • OmniClass-betegnelseSecurity Access Controls

    Tilgængelighed i region

    Nordamerika
    Anguilla
    Antigua og Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Caribbean Netherlands
    Caymanøerne
    Costa Rica
    Cuba
    Curaçao
    De britiske jomfruøer
    Dominica
    Dominikanske Republik
    El Salvador
    Grenada
    Grønland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Jomfruøerne
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts og Nevis
    Saint Lucia
    Saint Pierre og Miquelon
    Saint Vincent og Grenadinerne
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad og Tobago
    Turks- og Caicosøerne
    USA