Publikovat produkty
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
    PROTAN

    Protan Protected (ballasted) warm roof system on concrete substrate

    PROTAN PROTECTED WARM ROOF SYSTEM ON CONCRETE SUBSTRATE

    The roof is built up on the load-bearing structure with the vapour control layer at the bottom, followed by insulation, Protan membrane and then the ballast on top. The ballast is often pebbles,paving slabs or intensive green roofs. The fall requirements for the construction can be incorporated into the deck substrate or the insulation under the membrane.

    A ballasted roof with paving slabs is suitable for situations where foot traffic is expected, such as terraced areas for recreational use or frequent service access. Such roofs are used for both heavy load-bearing structures made of concrete and light load-bearing structures made of sheet steel. The composition principle is the same for both solutions. The heavy structure may be most suited to premises with a high moisture content, for example, while the light structure may be most suited to warehouses and the like. Pebbles may be used as ballast where the foot traffic is limited to minimal maintenance and inspection access only.

    For roof structures that are exposed to extra heavy loads, Protan GG Membrane is recommended.

    .CONSTRUCTION STRUCTURE:

    • PROTECTED WITH GRAVEL- /INVERTED- /INTENSIVE GREEN ROOFS
    • PROTAN G / GG MEMBRANE
    • INSULATION
    • VAPOUR CONTROL LAYER
    • CONCRETE SUBSTRATE

    PROTAN G / GGMEMBRANE

    • Protan G membrane is a glass fibre reinforced, microbe durable PVC membrane for gravel ballasted roofs, inverted roofs, and green roofs. 
    • Protan G membrane can withstand high and low temperatures and attack by micro-organisms. 
    • The membrane is dimensionally stable, which is important in load-bearing applications, inverted roofs, and green roofs. 
    • Protan G membrane can withstand high and low temperatures and attack by micro-organisms.
    • The membrane is welded together using hot air.

    SYSTEM INSTALLATION METHOD:

    • Protan G membrane is installed as a loose layer without fasteners securing it to the substrate. Protection layers are required where there is a risk of damage by the layers installed over the membrane.

    INSULATION:

    Various types of insulation can be used in combination with Protan membranes and can be flat insulation or sloped insulation. The material type and design will depend on the building design, fire classification and local regulation requirements. The compression strength of the insulation must be considered and chosen to according to the roof application.

    • Mineral wool (MW) – can be glass or stone type
    • Expanded polystyrene (EPS) - a glass separation layer / migration barrier must be used
    • Polyisocyanurate (PIR) - foil faced
    • Combination EPS-MW

    VAPOUR CONTROL LAYER:

    • Polyethylene
    • Bitumen

    CONCRETE SUBSTRATE:

    • Structural concrete as either precast elements or reinforced cast in-situ.


    Specifikace
    • TECHNICAL SPECIFICATION

      Protan G specifications are subject to availability and may not be available or approved in all countries/regions.

      Membrane thickness:

      • 1.5 mm

      Membrane standard widths: 

      • 2.0 m 

      Membrane standard roll lengths: 

      • 7.5 m 
      • 15

      Membrane colours (nearest RAL code):

      • Dark grey F94 - RAL 7012 
      • Light grey F91- RAL 7040

      FIRE CLASSIFICATION

      Protan G has no fire classification.



    Technická specifikace
    • Jedinečná ref. hodnotaprotected_concrete_eu
    • Skupina výrobkůRoofing
    • Skupina produktůSingle Ply Membrane
    • TypObjekt
    • Datum zveřejnění2019-02-19
    • Číslo vydání1
    Související
    • Hlavní materiálPVC
    • Vedlejší materiálIzolace
    • Navrženo vNorsko
    • Vyrobeno vNorsko
    Klasifikace
    • Kategorie objektu BIMStavební materiály - Voděodolné
    • Klasifikace IFCStřecha
    • Název UNSPSCRoofing membranes
    • Kód UNSPSC30151505
    • Kód Uniclass 2015Ss_30_40_30_80
    • Popis Uniclass 2015Single layer sheet warm roof covering systems
    • Kód CSI MasterFormat 201407 50 00
    • Název CSI MasterFormat 2014Membrane Roofing
    • Číslo OmniClass23-13 39 31 11 27
    • Název OmniClassPolyvinyl chloride (PVC) Single Layer Roof Membranes
    • Kód CSI UniFormat IIB3010
    • Název CSI UniFormat IIRoof Coverings

    Dostupnost regionu

    Evropa Asie
    Ålandy
    Turecko
    Albánie
    Andorra
    Belgie
    Bělorusko
    Bosna a Hercegovina
    Bulharsko
    Černá Hora
    Česká republika
    Chorvatsko
    Dánsko
    Estonsko
    Faerské ostrovy
    Finsko
    Francie
    Gibraltar
    Guernsey
    Irsko
    Island
    Itálie
    Jan Mayen
    Jersey
    Kypr
    Lichtenštejnsko
    Litva
    Lotyšsko
    Lucembursko
    Maďarsko
    Malta
    Moldavsko
    Monako
    Německo
    Nizozemsko
    Norsko
    ostrov Man
    Polsko
    Portugalsko
    Rakousko
    Řecko
    Rumunsko
    Rusko
    San Marino
    Severní Makedonie
    Slovensko
    Slovinsko
    Španělsko
    Srbsko
    Švédsko
    Švýcarsko
    Ukrajina
    Vatikán
    Velká Británie