Publikovat produkty
Snap-On Batten Standing Seam metal roof panel

Snap-On Batten Standing Seam metal roof panel

Features
  • Ideal for transition roofs
  • Herr-Voss corrective leveled
  • Stiffener beads available
  • 30 year non-prorated finish warranty
  • Maximum panel length of 45 feet

Snap-On metal roofing panels are designed for use in roofing, mansard and fascia applications. The panels are designed to be installed over a waterproofed solid substrate and a minimum 3:12 roof pitch. Snap-On Metal Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.


These metal panels are ideal for specification on applications where roof transitions are required. The simplicity of the pan design combined with corrective leveling provides superior flatness and allows for greater workability on site.

Trim

All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 20-year non-pro-rated finish warranty can be supplied covering finish performance. Vinyl masking is recommended on all fabrication applications where extra handling is expected. NOTE: The strippable film must be removed immediately after installation.

Installation

Snap-On Metal Panels are installed over solid decking (5/8″ plywood, nailboard insulation or equal) with an underlayment of 30# (min.) roofing felt applied horizontally from eave to ridge. Panels shall be fastened using Petersen Non-Penetrating Clips, fastening on 18″ centers (max.). Minimum slope at 3:12 pitch. Consult a local architect or engineer for requirements of local codes and conditions.

Technická specifikace
  • Jedinečná ref. hodnotaroof-panel-pac-clad-snap-on-batten-panel
  • Skupina výrobkůRoof Panels
  • Skupina produktůRoof Panels
  • TypObjekt
  • Datum zveřejnění2015-06-09
  • Číslo vydání1
Související
  • Navrženo vSpojené státy americké
  • Vyrobeno vSpojené státy americké
Klasifikace
  • Kategorie objektu BIMKonstrukce - Střecha
  • Klasifikace IFCStřecha
  • Název UNSPSCRoofing materials
  • Kód UNSPSC301515
  • Kód Uniclass 2015Pr_25_93_72
  • Popis Uniclass 2015Roofing and cladding units
  • Kód CSI MasterFormat 201407 40 00
  • Název CSI MasterFormat 2014Roofing and Siding Panels
  • Číslo OmniClass23-13 39 27
  • Název OmniClassRoof Cladding

Dostupnost regionu

Severní Amerika
Spojené státy americké