Slab without bevel pavinature 60x40

Prefabricated high-strength concrete pavement of the Pavigesa® brand. Conceived to be used in outdoor spaces, for use with vehicle traffic or pedestrian use, it meets all the requisites required by current regulations regarding mechanical resistance, durability and slipperiness in any climatic situation. In Pavigesa® we use Econature® technology, which converts our prefabricated concrete pavements into photocatalytic NO2 collectors, converts the neutralization of greenhouse gases in cities. Our Econature® flooring requires the required Class 3 decontamination requirement according to UNE 127197-1 2013. Every detail is important, so our pavers are manufactured using a unique pressure and sealing system in the market, specially designed by Pavigesa® for 35 years to help close the exterior pores of the paver, thus achieving a uniform and waterproof finish of a unbeatable quality. In Pavigesa® we use 20% of raw material obtained from recycled material, mostly from the manufacturing system itself, thus contributing to a very low production of CO2 in the manufacturing process.

Specifikace

Pavigesa® brand vibro-pressed concrete paving pavement. Physico-mechanical characteristics: • Breaking load T> = 3.6 Mpa • Breaking load per Unit of Length (F)> = 250 N / mm² • Abrasion wear resistance Class 4 Marking I • Class 3 slip / slip resistance according to CTE. Average declared value 75.0 - USRV • Water Absorption Class 2 Marking B • Climate resistance Class 2 Marking B. Water absorption% by mass <= 6% PAVIGESA® PREFABRICATED ADOQUINES AND Slab INSTALLATION RECOMMENDATIONS 1st Supporting Base: • Option 1: Compacted floor, 20cm to 25cm • Option 2: Reinforced concrete flooring, 15cm to 20cm with 15x15x6mm welded mesh on compacted floor, 20cm to 25cm It will depend on the stability of the land. 2nd Placement of pavers and slabs: • 4 cm of river washed sand without clays or 4 cm of gravel with 0-5mm granulometry. • Pavigesa® tile or paver. • Grouting with silica sand in successive sweeps up to 90-100% of the joint. The approximate amount used will be 7.0 kg / m2 • Compaction with 400Kg mechanical tray (rubber). Not recommended for large tiles. • Final grouting until the board is clogged. The placement of the paving system and slabs is done as a flexible pavement, so there is no need to include cement mortar in its placement as long as the contour of the surface to be covered is properly confined (curb or any other confinement system .) It is not necessary to use additional separators in the parts.

Technická specifikace

Jedinečná ref. hodnotabaldosa_sin_bisel_pavinature_60x40
Skupina výrobkůSlabs
Skupina produktůSlabs
TypObjekt
Datum zveřejnění2019-10-08
Číslo vydání1
Výška (mm)400
Šířka (mm)600

Odkazy

URL produktuhttps://www.pavigesa.com/productos/losa-pavinature-60x40
Instruktážní videohttps://www.creur.es/gu%C3%ADas-de-montaje/

Související

Hlavní materiálBeton
Vedlejší materiálBeton
Navrženo vŠpanělsko
Vyrobeno vŠpanělsko
Čistá hmotnost (kg)130

Klasifikace

Kategorie objektu BIMStavební materiály - Dlažba & Kameny
Klasifikace IFCFloor
Název UNSPSCConcrete tiles or flagstones
Kód UNSPSC30131703
Kód Uniclass 2015Pr_25_93_60_19
Popis Uniclass 2015Concrete pavers
Kód CSI MasterFormat 201432 13 13
Název CSI MasterFormat 2014Concrete Paving
Číslo OmniClass23-11 21 17 11 17
Název OmniClassPrecast Concrete Pavers

Dostupnost regionu

Jižní Amerika	Severní Amerika	Evropa
Argentina	Bahamy	Španělsko
Bolívie	Belize
Chile	Dominikánská republika
Ekvádor	Guatemala
Falklandy (Malvíny)	Haiti
Francouzská Guyana	Honduras
Guyana	Jamajka
Kolumbie	Kostarika
Paraguay	Kuba
Peru	Mexiko
Surinam	Nikaragua
Uruguay	Panama
Venezuela	Portoriko
	Salvador
	Trinidad a Tobago