i250 Commercial Tankless System - Wall Hung

i250 Commercial Tankless System - Wall Hung

Commercial Tankless on-demand water heater

KEY FEATURES

• Stainless (316L) Heat Exchanger
• Flexible-Floating Design, stress-relieving and thermal shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Specifikace

Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
Thermal Efficiency 92%
Energy Factor N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent (2” not allowed at elevations above 4,000 ft) N/A
Max 2” Vent Length - Two Pipe / Direct Vent (2” not allowed at elevations above 4,000 ft) N/A
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Technická specifikace

Jedinečná ref. hodnotai250
Skupina výrobkůi Series
Skupina produktůCommercial Tankless System - Wall Hung
TypObjekt
Datum zveřejnění2020-05-11
Číslo vydání1

Odkazy

URL produktuhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i250-i-series/
Pokyny k instalacihttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Certifikace výrobkuhttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Technický popishttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii

Související

Hlavní materiálOcel
Navrženo vSpojené státy americké
Vyrobeno vSpojené státy americké

Klasifikace

Kategorie objektu BIMHVAC - Ohřívače vody
Klasifikace IFCVýměník tepla
Kód ETIMEC000392
Název ETIMInstantaneous water heater
Název UNSPSCCommercial water heaters
Kód UNSPSC40101826
Kód Uniclass 2015Pr_60_60_96
Popis Uniclass 2015Water heaters
Kód CSI MasterFormat 201423 00 00
Název CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
Číslo OmniClass23-31 29 11
Název OmniClassInstantaneous Hot Water Heaters
Kód CSI UniFormat IID3090
Název CSI UniFormat IIOther HVAC Systems & Equipment

Dostupnost regionu

Severní Amerika	Jižní Amerika
Anguilla	Guyana
Antigua a Barbuda	Surinam
Aruba
Bahamy
Barbados
Belize
Britské Panenské ostrovy
Curaçao
Dominika
Dominikánská republika
Gaudeloupe
Grenada
Haiti
Jamajka
Kajmanské ostrovy
Kanada
Karibské Nizozemsko
Kuba
Martinik
Montserrat
ostrovy Turks a Caicos
Pannenske Ostrovy
Portoriko
Spojené státy americké
Svatá Lucie
Svatý Bartoloměj
Svatý Kryštof a Nevis
Svatý Martin
Svatý Martin
Svatý Vincenc a Grenadiny
Trinidad a Tobago