Publikovat produkty
TrenchFormer ® TFX
ABT, Inc.

TrenchFormer ® TFX

TrenchFormer  6″- 24″

TrenchFormer is a pre-engineered, cast-in-place concrete forming system for forming surface drainage trenches, catch basins, utility chases, and voids in concrete placements. The system includes expanded polystyrene (EPS) form profiles, steel inlay rails, patented no-float legs, grates, and grate retainers. TrenchFormer is available in various width, depths, slopes and trench bottom configurations. TrenchFormer replaces hand-forming, heavy materials, keyways and waterstops normally required with trench drains and utility chases.
Its components are made in the most commonly constructed sizes. TrenchFormer consists of 8 ft. (2.4 M ) pre-sloped form segments.  Former sections are available in a variety of slopes.
The segments have integral deforming grooves for easy removal and full length longitudinal grooves for coplanar rail spacing.
The steel components are angle rails with anchoring studs welded on 11 in. (280 mm) centers to the outside corners. 1/2 in. (12.7 mm) threaded U-shaped no-float legs attach to horizontal tabs on each rail. Each rail end is designed to accept a Rail Alignment Clip which retains adjacent rail segments.
Prefabricated L-rail and T-rail assemblies allow for field installation of 90° turns anywhere in the pre-sloped layout.  These assemblies have rail reinforcement built into the areas where the grates are unsupported in other systems. This reinforcement provides load capacity for AASHTO H2O load ratings.
Outlet piping is butted to an annular groove made in the EPS form prior to concreting. For trench junctions or for large outlet sizes, four catch basins are provided. A selection of gratings and solid covers is available for various loadings.

Technická specifikace
  • Jedinečná ref. hodnotatrenchformer-tfx
  • Skupina výrobkůCast in Place Trench Drain
  • Skupina produktůTrenchformer TFX
  • TypObjekt
  • Datum zveřejnění2020-06-26
  • Číslo vydání1
Související
  • Hlavní materiálOcel
  • Vedlejší materiálPolystyren pěnový
  • Navrženo vSpojené státy americké
  • Vyrobeno vSpojené státy americké
Klasifikace
  • Kategorie objektu BIMInstalace - Drenáž
  • Kód Uniclass 2015Pr_65_52_24_24
  • Popis Uniclass 2015Drainage channels with gratings
  • Kód CSI MasterFormat 201433 46 00
  • Název CSI MasterFormat 2014Subdrainage
  • Číslo OmniClass23-39 29 11
  • Název OmniClassWaste Water Drains
  • Kód CSI UniFormat IID2040
  • Název CSI UniFormat IIRain Water Drainage

Dostupnost regionu

Severní Amerika
Anguilla
Antigua a Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudské ostrovy
Britské Panenské ostrovy
Curaçao
Dominika
Dominikánská republika
Gaudeloupe
Grenada
Grónsko
Guatemala
Haiti
Honduras
Jamajka
Kajmanské ostrovy
Kanada
Karibské Nizozemsko
Kostarika
Kuba
Martinik
Mexiko
Montserrat
Nikaragua
ostrovy Turks a Caicos
Panama
Pannenske Ostrovy
Portoriko
Saint-Pierre a Miquelon
Salvador
Spojené státy americké
Svatá Lucie
Svatý Bartoloměj
Svatý Kryštof a Nevis
Svatý Martin
Svatý Martin
Svatý Vincenc a Grenadiny
Trinidad a Tobago